VCIrus-406T02       VCI Powder       Drum-soluble

Features/Advantages

1 The VCI powder is especially applicable to the internal surface antirust of a confined space of the articles for antirust, including the articles’ cavity, hollow, curved faces, etc.

2 The continuous antirust effects remain if the confined space is enclosed after being opened.

3 After the articles for antirust are pun into the next procedure, the powder may be used without surface pretreatment.

4 No dirty marks will be left after the powder is applied, and it is easy to be removed by compressed air or cleaned by water.

5 The powder contains no silicones, phosphate and heavy metals, being safe to environment. It passes SGS certification and complies with RoHS directives.

Application Method:

1 Clean and dry the surfaces of the articles for antirust, without residual fragments, dirty marks and other filth left on them.

2 When applying loose powder in a dry process, evenly spray the powder on the surfaces of the articles for antirust with a low-pressure air hose or a sprayer without particularly concentrating on any side and the articles may be sealed after the operation is completed.

3 When applying loose powder in a wet process, prepare the powder into 0.5%-1% water solution, and then perform spraying, brushing, flushing or soaking procedures, and the articles may be sealed after the operation is completed.

4 When applying powder in bag in a dry process, place the powder bag within the distance (≤30cm) where VCI is valid, and endeavor to place or suspend it in the upper space of the articles for antirust because the density of VCI antirust gas is larger than that of air.

5 Generally, the normal consumption is 100g-130g/m3, which will be increased under severe environment.

6 Operate with clean gloves, and do not contact the articles for antirust with naked hands.

Specification：